Custom Applications and System Application Overrides
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Configure Branch HA in a Hybrid Topology with Gen-1 (3000) and Gen-2 (3200) Platforms
- Prisma SD-WAN Incidents and Alerts
Custom Applications and System Application Overrides
Learn about the applications that Prisma SD-WAN supports.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
Applications are at the core of the Prisma SD-WAN solution. ION devices deployed in
the network actively analyze each application flow to ensure that policies for
performance, compliance, and security are maintained, and optimum network connections
are used for each flow.
The ION device uses application definitions and fingerprinting technologies
for path selection, QoS, and firewall policies. Prisma SD-WAN identifies
each flow using various techniques such as prefix, port, signature, and SaaS. It
leverages this information to build a dynamic application map cache, ensuring an optimal
first packet match experience.
System applications are available by default, whereas you can configure
custom applications for your enterprise requirements. Prisma SD-WAN
supports more than 4000 system or native applications.
You can configure granular policy rules for cloud-based,
encrypted, and custom applications to the sub-application level
without decrypting the application traffic or without maintaining
long IP address lists for cloud-based applications such as Google
or Microsoft.
Starting with Release 6.0.1, Prisma SD-WAN supports unified App-IDs
to provide application detection services for Prisma SD-WAN and
PANW applications. Click ManageResourcesApplications to
view system applications from PANW and Prisma SD-WAN along with
custom applications in Prisma SD-WAN.
You can view the following types of applications:
- System (PANW)—Indicates system applications from PANW.
- System (CGX)—Indicates legacy system applications in Prisma SD-WAN.
- System (PANW, CGX)—Indicates applications common to PANW and Prisma SD-WAN.
- Custom—Indicates custom applications defined in Prisma SD-WAN.
Use the following links to configure custom applications and
system application overrides.