dump interface status interface module
Focus
Focus
Prisma SD-WAN

dump interface status interface module

Table of Contents

dump interface status interface module

Use the dump interface status interface module command to display the EEPROM information of a device interface.
Information displayed includes gigabit interface converter (GBIC) or small form-factor pluggable (SFP) and extended identifier. Details such as type of connector, transceiver codes and types, lengths supported for single-mode optical fiber (SMF), copper, and other optical fibers, along with vendor details, are also displayed.

Command

dump interface status [ all | interface interface name ] module

Options

allEnter all to display status for all interfaces.
interfaceEnter the interface name to display configuration for a specific interface.

Command Notes

RoleSuper, Read Only, Monitor
Related Commands
dump interface status
Introduced in Release 5.1.3

Example

dump interface status 14 moduleIdentifier : 0x03 (SFP)Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interfaceID)Connector : 0x00 (unknown or unspecified)Transceiver codes : 0x00 0x00 0x00 0x08 0x00 0x00 0x00 0x00Transceiver type : Ethernet: 1000BASE-TEncoding : 0x01 (8B/10B)BR, Nominal : 1300MBdRate identifier : 0x00 (unspecified)Length (SMF,km) : 0kmLength (SMF) : 0mLength (50um) : 0mLength (62.5um) : 0mLength (Copper) : 100mLength (OM3) : 0mLaser wavelength : 0nmVendor name : AVAGOVendor OUI : 00:17:6aVendor PN : ABCU-5730RZVendor rev :Option values : 0x00 0x10Option : TX_DISABLE implementedBR margin, max : 0%BR margin, min : 0%Vendor SN : AGC15315200QDate code : 150729