: dump routing multicast config
Focus
Focus

dump routing multicast config

Table of Contents

dump routing multicast config

Use the dump routing multicast config command to display the routing multicast specific configurations of a device.

Command

dump routing multicast config ( all | brief | interface | rp | wanpeers )

Options

allEnter all to know all the routing multicast specific configurations of a device.
briefEnter brief to know the brief routing multicast specific configurations of a device.
interfaceEnter interface to know the interfaces on which multicast traffic is forwarded or replicated.
rpEnter rp to display the address of the Rendezvous Point (RP) in the network.
wanpeersEnter wanpeers to know the wanpeer details of the routing multicast.

Command Notes

RoleSuper, Read Only, Monitor
Related Commands
dump routing multicast status
Introduced inRelease 5.6.1

Example

dump routing multicast config all Global ------ SPT : Enabled BSM : Enabled DR Priority : 200 SSM exclude group prefix: 0.0.0.0/0 IGMP Protocol Parameters ------------------------ Last Member Query Count : 2 Last Member Query Interval : 10 Query Interval : 125 Query Max Response Time : 100 PIM Protocol Parameters ------------------------- Hello Hold Time : 105 Hello Interval : 30 Join Prune Interval : 60 Interfaces ---------- Interface : 1 Device : eth1 IGMP Version : IGMPV3 DR Priority : 1 No. of IGMP Static Joins: 0 Interface : 4 Device : eth4 IGMP Version : IGMPV3 DR Priority : 1 No. of IGMP Static Joins: 0 WAN Peers ---------- ID : 1650617954511023996 LocalShimIP : 100.64.0.4 RemoteSite : London RemoteShimIpv4 : 100.64.0.1 Rendezvous Point(RP) -------------------- Name : RP1 ID : 1650629816749002696 Address : 1.1.1.1 Groups : Name : Prefix : 224.0.0.0/4 Type : Remote-Static