dump routing multicast internal vif-entries
Focus
Focus

dump routing multicast internal vif-entries

Table of Contents

dump routing multicast internal vif-entries

Use the dump routing multicast internal vif-entries command to display the internal vif entries in multicast.
This command is not available from the release 6.0.1 onward.

Command

dump routing multicast internal vif-entries

Options

None

Command Notes

RoleSuper, Read Only, Monitor
Related Commands
dump routing multicast status
Introduced in Release 5.6.1

Example

dump routing multicast internal vif-entries PIM VIF Interface array VIF Index Interface State Flags Address 0 64 pimreg Up 0x4 192.168.1.4 (eth1) 1 3 eth1 Up 0x240000 192.168.1.4 2 4 eth2 Up 0x200400 192.168.2.4 3 5 eth3 Up 0xa40000 192.168.3.4 4 6 eth4 Up 0xc0400 192.168.4.4 PIM VIF Entry list VIF Index Interface State Flags Address 0 64 pimreg Up 0x4 192.168.1.4 (eth1) 1 3 eth1 Up 0x240000 192.168.1.4 2 4 eth2 Up 0x200400 192.168.2.4 3 5 eth3 Up 0xa40000 192.168.3.4 4 6 eth4 Up 0xc0400 192.168.4.4