Focus

Prisma SD-WAN ION CLI Reference

inspect flow-arp

Table of Contents

inspect flow-arp

Use the inspect flow-arp command to inspect the address resolution protocol (ARP) entries used and recorded by the flow controller (FC) module. The ARP cache is displayed for all interfaces or a specific interface filtered by either interface name, VLAN ID, Host IP or Gateway ID.

Command

inspect flow-arp ( all | interface = interface | vlan= vlan_id | host= host_ip_address | gateway= gateway_id )

Options

all	Enter all to inspect data plane ARP cache for all interfaces.
interface	Enter the interface name to inspect data plane ARP cache for an interface.
vlan	Enter the VLAN ID to inspect data plane ARP cache for a VLAN.
host	Enter the host IP address to inspect data plane ARP cache for a host.
gateway	Enter the gateway ID to inspect data plane ARP cache for a gateway.

Command Notes

Role	Super, Read Only
Related Commands	inspect system arp
Introduced in	Release 4.5.1

Example

inspect flow-arp all
				ifname device vlan_id host mac gateway arp_eth_addr router_arp_srcrouter valid expired expire_secslan 1 eth11 10 10.10.10.9 ec:b9:07:00:0f:c2 10.10.10.10 True True
				False True False 1215
				wan 1 eth10 220 220.220.220.1 00:50:56:a7:1d:9a 220.220.220.1 True
				False True True False 315359408
				wan 1 eth10 10 10.10.10.10 00:50:56:a7:71:8c 10.10.10.10 True
				False True True False 315359406
				wan 1 eth10 35 35.35.35.1 00:50:56:a7:24:02 35.35.35.1 True False
				True True False 315359408
				wan 1 eth10 110 110.110.110.15 00:50:56:a7:62:19 110.110.110.1
				True False False True False 1207

inspect fib-leak

inspect flow brief