VM-Series Deployment Guide
    : Create Template Stacks and Device Groups on Panorama
    Focus
    Download PDF
    Focus
    1. Home
    2. VM-Series
    3. VM-Series Deployment Guide
    4. Set Up the VM-Series Firewall on VMware NSX
    5. Set Up the VM-Series Firewall on NSX-T (East-West)
    6. Deploy the VM-Series Using the Operations-Centric Workflow
    7. Create Template Stacks and Device Groups on Panorama
    Download PDF

    VM-Series Deployment Guide

    Create Template Stacks and Device Groups on Panorama

    Table of Contents
    End-of-Life (EoL)

    Create Template Stacks and Device Groups on Panorama

    To manage the VM-Series firewalls for NSX-T using Panorama, the firewalls must belong to a device group and a template that is a member of a template stack. Device groups allow you to assemble firewalls that need similar policies and objects as a logical unit; the configuration is defined using the Objects and Policies tabs on Panorama. Use template stacks to configure the settings that are required for the VM-Series firewalls to operate on the network and associate; the configuration is defined using the Device and Network tabs on Panorama. And each template stack with zones used in your NSX-T configuration on Panorama must be associated with a service definition; at a minimum, you must create a zone within the template stack so that the NSX-T Manager can redirect traffic to the VM-Series firewall.
    Panorama can support deployments of both NSX-T North-South and NSX-T East-West at the same time. It is recommend that you configure separate device groups, template stacks, and service definitions for NSX-T North-South and NSX-T East-West.
    1. Add a device group or a device group hierarchy.
      1. Select PanoramaDevice Groups, and click Add. You can also create a device group hierarchy.
      2. Enter a unique Name and a Description to identify the device group.
      3. Click OK.
      4. Click Commit and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
    2. Add a template.
      1. Select PanoramaTemplates, and click Add.
      2. Enter a unique Name and a Description to identify the template.
      3. Click OK.
      4. Click Commit, and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
    3. Create a template stack.
      1. Select PanoramaTemplates, and click Add Stack.
      2. Enter a unique Name and a Description to identify the template.
      3. Click OK.
      4. Click Commit, and select Commit to Panorama to save the changes to the running configuration on Panorama.
    4. Create the zone(s) for each template.
      Each zone is mapped to a service profile on NSX-T Manager. To qualify, a zone must be of the virtual wire type and a template associated with a service definition.
      You can add up to 32 zones in each template.
      1. Select NetworkZones.
      2. Select the correct template in the Template drop-down.
      3. Select Add and enter a zone Name.
      4. Set the interface Type to Virtual Wire.
      5. Click OK.
      6. Verify that the zones are attached to the correct template.
      7. Click Commit, and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
        Panorama creates a corresponding service profile on NSX-T Manager for each qualified zone upon commit.

    © 2024 Palo Alto Networks, Inc. All rights reserved.