Focus

VM-Series Deployment Guide

Create Template Stacks and Device Groups on Panorama

Table of Contents

Create Template Stacks and Device Groups on Panorama

To manage the VM-Series firewalls for NSX-T using Panorama, the firewalls must belong to a device group and a template that is a member of a template stack. Device groups allow you to assemble firewalls that need similar policies and objects as a logical unit; the configuration is defined using the Objects and Policies tabs on Panorama. Use template stacks to configure the settings that are required for the VM-Series firewalls to operate on the network and associate; the configuration is defined using the Device and Network tabs on Panorama. And each template stack with zones used in your NSX-T configuration on Panorama must be associated with a service definition that you will create later; at a minimum, you must create a zone within the template stack so that the NSX-T Manager can redirect traffic to the VM-Series firewall. Later, you will associate a device group and template to your NSX-T deployment create a service definition.

Panorama can support deployments of both NSX-T North-South and NSX-T East-West at the same time. You must configure separate device groups, template stacks, and service definitions for NSX-T North-South and NSX-T East-West.

Add a device group or a device group hierarchy.
1. Select PanoramaDevice Groups, and click Add. You can also create a device group hierarchy.
2. Enter a unique Name and a Description to identify the device group.
3. Click OK.
4. Click Commit and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
Add a template.
1. Select PanoramaTemplates, and click Add.
2. Enter a unique Name and a Description to identify the template.
3. Click OK.
4. Click Commit, and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
Create a template stack and add your newly created template.
1. Select PanoramaTemplates, and click Add Stack.
2. Enter a unique Name and a Description to identify the template stack.
3. Under Templates, click Add and select the template you created in step 2 from the drop-down.
4. Click OK.
5. Click Commit, and select Commit to Panorama to save the changes to the running configuration on Panorama.
Create the zone(s) for each template.
The Panorama plugin for VMware NSX maps each zone to a service profile on NSX-T Manager. To qualify, a zone must be of the virtual wire type and be part of a template you will associate with a service definition; see Configure the Service Definition on Panorama for more information. In most uses cases, a single zone is sufficient. However, you must create multiple zones for multi-tenancy
You can add up to 32 zones in each template.
1. Select NetworkZones.
2. Select the correct template in the Template drop-down.
3. Select Add and enter a zone Name.
4. Set the interface Type to Virtual Wire.
5. Click OK.
6. Verify that the zones are attached to the correct template.
7. Click Commit, and select Panorama as the Commit Type to save the changes to the running configuration on Panorama.
Update the DNS and NTP server information of your template stack. You must complete this step if you are using device certificates in your deployment. This is required to ensure the firewalls deployed in your NSX-T environment have the correct DNS information needed to reach the device certificate server.
1. Verify that you specified the correct template stack from the Template drop-down.
2. Select DeviceSetupServices and click the Edit icon.
3. On the Services tab, enter the IP address of the Primary DNS Server and Secondary DNS Server.
4. On the NTP tab, enter the IP address of the NTP Server.
5. Click OK.
6. Commit your changes to Panorama.

Enable Communication Between NSX-T Manager and Panorama

Configure the Service Definition on Panorama