Inter-VSYS Communication Uses Two Sessions
Focus
Focus

Inter-VSYS Communication Uses Two Sessions

Table of Contents

Inter-VSYS Communication Uses Two Sessions

It is helpful to understand that communication between two virtual systems uses two sessions, unlike the one session used for a single virtual system. Let’s compare the scenarios.
Scenario 1—Vsys1 has two zones: trust1 and untrust1. A host in the trust1 zone initiates traffic when it needs to communicate with a device in the untrust1 zone. The host sends traffic to the firewall, and the firewall creates a new session for source zone trust1 to destination zone untrust1. Only one session is needed for this traffic.
Scenario 2—A host from vsys1 needs to access a server on vsys2. A host in the trust1 zone initiates traffic to the firewall, and the firewall creates the first session: source zone trust1 to destination zone untrust1. Traffic is routed to vsys2, either internally or externally. Then the firewall creates a second session: source zone untrust2 to destination zone trust2. Two sessions are needed for this inter-vsys traffic.