Perform the following procedure to view LLDP
settings and status.
View LLDP global settings.
Select NetworkLLDP.
On
the LLDP General screen, Enable indicates
whether LLDP is enabled or not.
If LLDP is enabled, the
configured global settings (Transmit Interval, Transmit Delay, Hold
Time Multiple, and Notification Interval) are displayed.
If LLDP is not enabled, the default values of the global settings
are displayed.
For descriptions of these values, see
second step in Configure
LLDP.
View the
LLDP status information.
Select the Status tab.
(Optional) Enter a filter to restrict the
information that is displayed.
Interface Information:
Interface—Name
of the interfaces that have LLDP profiles assigned to them.
LLDP—LLDP status: enabled or disabled.
Mode— LLDP mode of the interface:
Tx/Rx, Tx Only, or Rx Only.
Profile—Name of the profile assigned
to the interface.
Transmission Information:
Total Transmitted—Count of LLDPDUs
transmitted out the interface.
Dropped Transmit—Count of LLDPDUs
that were not transmitted out the interface because of an error.
For example, a length error when the system is constructing an LLDPDU for
transmission.
Received Information:
Total
Received—Count of LLDP frames received on the interface.
Dropped TLV—Count of LLDP frames discarded
upon receipt.
Errors—Count of TLVs that were received
on the interface and contained errors. Types of TLV errors include:
one or more mandatory TLVs missing, out of order, containing out-of-range
information, or length error.
Unrecognized—Count of TLVs received
on the interface that are not recognized by the LLDP local agent.
For example, the TLV type is in the reserved TLV range.
Aged Out—Count of items deleted from
the Receive MIB due to proper TTL expiration.
View summary LLDP information for each neighbor seen
on an interface.
Select the Peers tab.
(Optional) Enter a filter to restrict the
information being displayed.
Local Interface—Interface on the firewall that detected
the neighboring device.
Remote Chassis ID—Chassis ID
of the peer. The MAC address will be used.
Port ID—Port
ID of the peer.
Name—Name of peer.
More info—Provides
the following remote peer details, which are based on the Mandatory
and Optional TLVs:
Chassis Type: MAC address.
MAC Address: MAC address of the peer.
System Name: Name of the peer.
System Description: Description of the peer.
Port Description: Port description of the peer.
Port Type: Interface name.
Port ID: The firewall uses the interface’s ifname.
System Capabilities: Capabilities of the system. O=Other,
P=Repeater, B=Bridge, W=Wireless-LAN, R=Router, T=Telephone
Enabled Capabilities: Capabilities enabled on the peer.
Management Address: Management address of the peer.