Configure and Attach a Filter Context to a Device Interface in IPFIX
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Prisma SD-WAN Clarity Reports
- Prisma SD-WAN Incidents and Alerts
Configure and Attach a Filter Context to a Device Interface in IPFIX
Configure filter contexts for selecting IPFIX flow records. Attach a filter context to an
ION device interface to filter flow records for export in Prisma SD-WAN IPFIX.
Where Can I Use
This? | What Do I
Need? |
---|---|
|
|
Filter Context is a criteria used to filter
the flow records that are exported to the collector.
- Select.ManageResourcesConfiguration ProfilesIPFIXContextsCreate Filter Context
- Enter anameand an optionaldescription.
- Savethe filter context.If you have configured a filter context and used it in a profile, you must Attach a Filter Context to a Device Interface in IPFIX for filtering the flow records.Use the IPFIX filter context when configuring a filter as part of either an IPFIX profile or an IPFIX device override.You can assign an IPFIX filter context to multiple interfaces of a single ION device or multiple ION devices. You cannot assign an IPFIX filter context to a controller interface because the controller interface does not forward application traffic.
Attach a Filter Context to a Device Interface in IPFIX
Attach a filter context to an ION device interface to filter flow records for
export. You can assign an IPFIX filter context to multiple interfaces of a
single ION device or to multiple ION devices.
- Select a filter context and assign to a device interface.
- Select.ManageResourcesConfiguration ProfilesIPFIXContextsFilter
- Click the ellipsis icon for an IPFIX Filter Context, selectView Interface Bindings, and then clickBind Interfaces.
- Select a device and an interface to bind the filter context.You can assign a filter context to any of the following interfaces:Interface TypeSupports Filter ContextControllerNoVirtual PortsYesLoopbackNoStandard VPNNoVirtual InterfacesYesPort ChannelNoSub-interfacesYesPPPoEYesBypass PairYes
- Select an ION device interface and bind the filter context.
- Select.ManageSetupDevicesClaimedSelect a deviceConfigure the deviceInterfaces
- Select an interface to assign a filter context for filtering flow records.You cannot assign an IPFIX filter context to a controller interface. This is because the controller interface does not forward application traffic records.